Squealing noise from the engine (belt squeal)
A sharp, high squeal from the front of the engine — often on cold or damp mornings, at start-up, or when you switch on the A/C or turn the wheel — is the classic sound of a slipping auxiliary (serpentine) belt.
Most likely causes
Worn or glazed auxiliary belt
Clues: Squeal at start-up or in wet weather; the belt looks shiny, cracked or frayed.
Usual fix: Replace the belt, and the tensioner too if it is weak.
How urgent: Get it checked soon
Weak belt tensioner
Clues: Squeal or chirp that comes back soon after a new belt; the tensioner arm shakes at idle.
Usual fix: Replace the tensioner together with the belt.
How urgent: Get it checked soon
Seized or stiff pulley
Clues: Squeal when a load comes on — A/C, steering at full lock, many electrical loads — or a growl from one part.
Usual fix: Find the stiff part (A/C compressor, alternator, pump, idler pulley) and replace it.
How urgent: Get it checked soon
Oil or coolant on the belt
Clues: Squeal with a wet, dirty belt and signs of a leak nearby.
Usual fix: Fix the leak first, then fit a new belt — a soaked belt keeps slipping.
How urgent: Get it checked soon
What you can check yourself
- With the engine off, look at the belt for cracks, shine or frayed edges.
- Note whether the squeal starts when switching on the A/C or turning the steering.
- Check for oil or coolant leaks near the front of the engine.
When to stop driving
Stop as soon as it is safe if the squeal ends with a bang and the battery light comes on, the steering becomes heavy or the temperature rises — the belt has probably broken, and on many cars it drives the water pump.
Similar noises
- Whining noise that rises with speed or engine revs
- Hissing noise from the engine bay
- Ticking or tapping noise from the engine
This guide is general information, not a diagnosis of your car. Only a mechanic who inspects the car can confirm the cause. If the car feels unsafe, stop driving and call for help.